Does anyone have this visible within Maxidot, relating specifically to vehicles with the cornering Bi-Xenon setup.
I'd like to activate this, for a trip to Europe.
Thanks,
Steve
↧
Tourist Lighting Mode
↧
can anyone help?
Is there anyone in the Bristol Bath Chippenham area that has vcds and is competent with being able to do the following to my 2013 skoda yeti 4x2 se diesel?
Plus anything else that I have missed that can be done can anyone else please advise what can be added to the list
Large MPH display
needle ‘staging’
front fog lights for the coming / leaving home lights
cornering lights
LED rear numberplate lights
Front DRL dim whilst indicating
↧
↧
issue adaptation module 5f
I've got a VCDS 15.7.1 installed on my laptop and I need to modify some adaptation values of my navigation system (MIB1)
The issue is that sometime the value doesn't change and other software change others values.
could you help me ?
thanks
↧
Anyone near me?
Can anyone local to Chertsey with VCDS activate a few things on my 2003 Fabia 1.4 16v Estate there's beer money in it for you lol.
Cheers
John
↧
is VCDS worth it for a novice?
was going to see a member on here who kindly offered to do a VCDS read and clear etc of my car but the wife fell ill so i couldn't make it.
the wife has just said she will buy me the VCDS for my birthday in 2 weeks if i want it 
my question is this, is it worth it for me?
i have just bought a 2006 Octavia and my son has a 2008 Octavia and we are possibly getting a new Octavia or Superb in the next year or so
i know that i can go on the list(map) of people who can help others but i am a novice and wouldn't want to screw someones car up because i don't know what i am doing
so what do you guys who use it in a hobby capacity think? is it worth it for me? is it easy enough to get round and learn without bricking the ecu?
thanks in advance guys 
↧
↧
Remapping the 1.6tdi
Spoken to the guy I use to remap cars about remapping my octy mk3 1.6 tdi 105bhp, he says safe 140, 145 would be iffy and 150 can cause premature clutch failure.
So what is the safe limit for the car Engine and ancillaries etc? I'd like 150 but given that it'll be doing circa 50k a year I don't want premature clutch failure!
So what is the safe limit for the car Engine and ancillaries etc? I'd like 150 but given that it'll be doing circa 50k a year I don't want premature clutch failure!
↧
Lane assist
Hello, i found information for activate lane assist in my superb 3 combi. I have this information for passat.
anyone can try this coding ?
Modulo 03
Debemos tocar el último Byte
Este era el mío que venía de fábrica
0E-EC-6A-8F-34-20-2B-72-07-80-06-02-41-C9-49-70-56-2C-D4-E0-60-82-92-F1-34-20-F0-78-C0-82
Y este modificado
0E-EC-6A-8F-34-20-2B-72-07-80-06-02-41-C9-49-70-56-2C-D4-E0-60-82-92-F1-34-20-F0-78-C0-A2
Aclaración modificación de byte
El Byte 82=10000010 el A2=10100010, como veis lo único que cambia en el bit marcado en rojo, ese sería el cambio
Módulo 13
Debemos tocar los Bytes 4 y 6
Este era el mío que venía de fábrica
2A-04-60-D3-51-FF-C4-28-94-9C-80-4D
Y este modificado
2A-04-60-D3-59-FF-C7-28-94-9C-80-4D
En los dsg tenéis que poner en el Byte 4 “5D”, eso creo que os activara la Asistencia de emergencia que os frenara el coche hasta deteneros.
2A-04-60-D3-5D-FF-C7-28-94-9C-80-4D
Aclaración modificación de bytes
El byte 51=01010001 el 59=01011001, con dsg 5D=01011101
El Byte C4=11000100 el C7=11000111
Módulo 17
Este era el mío que venía de fábrica
07-A4-02-10-2F-8C-00-08-00-88-7B-09-10-01-00-00-00-00-00-00
Y este modificado
07-A4-02-10-6F-8C-00-08-00-88-7B-2B-10-01-00-00-00-00-00-00
Aclaración modificación de bytes
El byte 2F= 00101111 el 6F= 01101111
El Byte 09= 00001001 el 2B= 00101011
Módulo 44
Quien tenga la centralita con 2 Bytes no tocarla aquí tocaremos el Byte 3
Este era el mío que venía de fábrica
01-01-00-10-00-50-01
Y este modificado
01-01-00-11-00-50-01
Aclaración modificación de bytes
El byte 10= 00010000, el 11= 00010001
En centralitas con 2 bytes he encontrado esto sobre el golf VII que comparte gran parte de la electrónica
Seria activar en byte 0 el bit 4 tiene que poner lane assist installed
Módulo A5
Vamos a Secutity code y tecleamos 20103
Depues al coding
Este era el mío que venía de fábrica
00-04-08-01-00-00-04-01-00-22-13-46-C0-50-A1-00-10-00-0E-30-00-40
Y este modificado
00-04-08-01-00-00-04-01-00-22-13-46-C0-50-A1-00-94-00-0E-30-00-40
En los DSG que he visto en vez de 94 pone 98
Aclaración modificación de bytes
El byte 10= 00010000, el 94= 10010100, 98= 10011000
Módulo 5F
Vamos a Adaption
(21)-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning, ponemos activated
(23)-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold _high, ponemos activated
(49)-Car_Function_List_BAP_Gen2-LDW_HCA_0x19, ponemos activated
(50)-Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus, ponemos Databus extended
Thaks!
Enviado desde mi iPhone utilizando Tapatalk
anyone can try this coding ?
Modulo 03
Debemos tocar el último Byte
Este era el mío que venía de fábrica
0E-EC-6A-8F-34-20-2B-72-07-80-06-02-41-C9-49-70-56-2C-D4-E0-60-82-92-F1-34-20-F0-78-C0-82
Y este modificado
0E-EC-6A-8F-34-20-2B-72-07-80-06-02-41-C9-49-70-56-2C-D4-E0-60-82-92-F1-34-20-F0-78-C0-A2
Aclaración modificación de byte
El Byte 82=10000010 el A2=10100010, como veis lo único que cambia en el bit marcado en rojo, ese sería el cambio
Módulo 13
Debemos tocar los Bytes 4 y 6
Este era el mío que venía de fábrica
2A-04-60-D3-51-FF-C4-28-94-9C-80-4D
Y este modificado
2A-04-60-D3-59-FF-C7-28-94-9C-80-4D
En los dsg tenéis que poner en el Byte 4 “5D”, eso creo que os activara la Asistencia de emergencia que os frenara el coche hasta deteneros.
2A-04-60-D3-5D-FF-C7-28-94-9C-80-4D
Aclaración modificación de bytes
El byte 51=01010001 el 59=01011001, con dsg 5D=01011101
El Byte C4=11000100 el C7=11000111
Módulo 17
Este era el mío que venía de fábrica
07-A4-02-10-2F-8C-00-08-00-88-7B-09-10-01-00-00-00-00-00-00
Y este modificado
07-A4-02-10-6F-8C-00-08-00-88-7B-2B-10-01-00-00-00-00-00-00
Aclaración modificación de bytes
El byte 2F= 00101111 el 6F= 01101111
El Byte 09= 00001001 el 2B= 00101011
Módulo 44
Quien tenga la centralita con 2 Bytes no tocarla aquí tocaremos el Byte 3
Este era el mío que venía de fábrica
01-01-00-10-00-50-01
Y este modificado
01-01-00-11-00-50-01
Aclaración modificación de bytes
El byte 10= 00010000, el 11= 00010001
En centralitas con 2 bytes he encontrado esto sobre el golf VII que comparte gran parte de la electrónica
Seria activar en byte 0 el bit 4 tiene que poner lane assist installed
Módulo A5
Vamos a Secutity code y tecleamos 20103
Depues al coding
Este era el mío que venía de fábrica
00-04-08-01-00-00-04-01-00-22-13-46-C0-50-A1-00-10-00-0E-30-00-40
Y este modificado
00-04-08-01-00-00-04-01-00-22-13-46-C0-50-A1-00-94-00-0E-30-00-40
En los DSG que he visto en vez de 94 pone 98
Aclaración modificación de bytes
El byte 10= 00010000, el 94= 10010100, 98= 10011000
Módulo 5F
Vamos a Adaption
(21)-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning, ponemos activated
(23)-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold _high, ponemos activated
(49)-Car_Function_List_BAP_Gen2-LDW_HCA_0x19, ponemos activated
(50)-Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus, ponemos Databus extended
Thaks!
Enviado desde mi iPhone utilizando Tapatalk
↧
Diesel mapper
I currently have a stage 1 shark map on my Octavia VRS. Soon I'll be fitting an S3 intercooler and Miltek exhust along with DPF and EGR delete.
Obviously I need the EGR and DPF mapping out and I want a stage 2 map at the same time.
I am happy with the map from Shark but not their service so I won't be using them again.
So what other mappers are rated?
I've heard some bad reviews about Awesome who are local. Are Darkside any good and has anybody used Derv tech in Trafford Park? I drove past Derv tech earlier today and noticed quite a few Fabia diesels outside.
↧
Koni FSD reliability
Driving to work this morning, and I hear some slight clonking noises from the rear. I check, and one of the rear dampers has failed with leaking oil. 
I'd be interested to hear if others have had similar issues. My main concern / annoyance is this is my second set. The first one was replaced under warranty, and like the first set, it was the rear that failed.
So I appear to be suffering the same issue.
Fronts have been fine.
Anyone else had this? I need to check what the warranty / support status is. They were sourced via JKM who were excellent first time round in helping organise replacements.
Could old Eibach springs contribute to the problem? They seem fine, but maybe they've worn or lost their stiffness putting extra pressure on the dampers? I don't think it would be that as the fronts have been fine and still on the same set of springs.
Thanks.
↧
↧
Yeti Needle Sweep
Hi
I Have a 2016 Yeti, how can i enable the needle sweep when i cant do the below
How do I enable 'staging'? (needle sweep when ignition is turned on, needs the latest white MFD on newer cars)
go to 17- Instruments and click on "Adaptation - 10"
On the drop down list find "staging" and activate it.
Thanks
Phil
↧
2007 Golf sunroof question
Hi all
Was wandering. When you hold the close button. Windows close. Sun roof shuts and the blind closes too
Anyway I can stop the blind from closing with VCDS coding?
car is a 2007 golf estate.
Thanks
Phil
Was wandering. When you hold the close button. Windows close. Sun roof shuts and the blind closes too
Anyway I can stop the blind from closing with VCDS coding?
car is a 2007 golf estate.
Thanks
Phil
↧
1.6 TDI REMAP
Hi!!! , greetings from Chile ,i really love this forum and always read a lot of here. so i was having a problem... Im looking for a remap of my Fabia II FACELIFT 1.6. TDI and i would love your opinion, im between:
REVO: 127-131 Hp and 281-298 Nm torque
Upsolute: 135Hp and 300 Nm torque
Sedox: 139Hp and 298 Nm Torque
If anyone can share their experiences it would be great and thanks for all
Enviado desde mi iPhone utilizando Tapatalk
REVO: 127-131 Hp and 281-298 Nm torque
Upsolute: 135Hp and 300 Nm torque
Sedox: 139Hp and 298 Nm Torque
If anyone can share their experiences it would be great and thanks for all
Enviado desde mi iPhone utilizando Tapatalk
↧
K04-064 on a 20vt 1.8 4x4 Octavia (2005 mod)
Hi everybody,I am a newbie here on this site and I have a couple of questions because as I see most of you really know things about 20vt's. I recently replaced my stock turbo with a k04-064,I have also replaced the injectors-intercooler-exaust-fuel pump-downpipe-air intake manifold,did a custom remap...and some other stuff to make the car work right. And it does work perfectly beeing really fast and powerfull. The thing is that I stil have stock internals on the engine,and the question is: has anybody here made the same mods with a k04-064 on a stock engine? Will it last for more than a couple of years? Please notice that the engine code is ARX and it runs with 1,5 turbo pressure (over) and goes down to 1,0 (steady). I just want some advice on if I should go on forged internals or just leave it like this......
Oh...and I DO NOT do any street races whatsoever....I love my car and I am just not in to this kind of things....
Thanks in advance!
Oh...and I DO NOT do any street races whatsoever....I love my car and I am just not in to this kind of things....
Thanks in advance!
↧
↧
Odd One - Numer of Lane Change Blinks on 14 plate O3 VRS Combi
Not long ago bought cable, and I have been making doing the odd coding on my 14 plate 03., things like cornering fogs, HBA, teardrop wipe, Dimming DRL while indicating, etc. After I had done this, I noticed that I wasn't getting the 3 Lane change flashes on a tap of the indicator
So after taking out changes and double checking changes, I still hadn't got anywhere, and decided to go through the menus. And low, what do I find. An option for lane change flashes, but turned off. (I swear I never turned it off). So I now have my lane change flashes enabled again, but I only get 3, despite (2)-Turn signal control-Komfortblinken Blinkzyklen being set to 5.
Any ideas where I need to set the value, or get the controller to pick up the set value?
Thanks
↧
anyone know how to reset the DSG 6 speed box?
i have all these symptoms listed except for the flashing PRNDS
http://www.evosoft.dk/DSGRepair.html
i am changing the oil and filter tomorrow but need the gearbox reset as the above advice and this is what he suggests
http://wiki.ross-tech.com/wiki/index.php/6-Speed_Direct_Shift_Gearbox_(DSG/02E)
i am willing to travel and pay for the right member who is confident they know how to do it as even if i bought VCDS wouldn't have a clue and dont want to screw the box up more than it already is.
↧
K&N induction kit not fitting advice
Hi all,
I bought a k&n induction kit for my 9n3 gti, it's the one made specifically for my car, however I'm having trouble fitting it! Part of the installation is to put the filter adapter onto the maf, however the maf is about a mm to big for the adapter, should I get some sand paper and remove a small amount of rubber to make it fit? Or is there another way as its only a mm preventing it fitting!
Cheers
Ramjam
I bought a k&n induction kit for my 9n3 gti, it's the one made specifically for my car, however I'm having trouble fitting it! Part of the installation is to put the filter adapter onto the maf, however the maf is about a mm to big for the adapter, should I get some sand paper and remove a small amount of rubber to make it fit? Or is there another way as its only a mm preventing it fitting!
Cheers
Ramjam
↧
Vag Can Pro / VCDS
What is the best diagnostic tool: Vag Can Pro or VCDS?
↧
↧
Anyone near chichester willing to help enable BT option
Hello,
I have just installed a Bluetooth module into my fabia 2 with the swing radio. its working fine, plays music via BT and I can make phone calls fine. the problem lies within the maxi dot display on my dash... the phone menu isnt there!
I believe this needs to be enabled within VCDS, option 77 telephone or something like that. If there is anyone local to me and is willing to help that would be really great.
Thanks, James.
↧
Fault code 590081 logged in Air Con controller
Well, seeing as I've updated my Carista to V3, I thought that I'd give wife's August 2015 Polo 1.2TSI a quick scan - Carista found a fault in the Air Con controller, it reported "fault code 590081 ABS Inlet Valve - Left Front (N101)" - well that is not a very handy description, I'll need to advise Carista of that incorrect fault code labelling! Anyway, I scanned the car again with VCDS and also reported this fault but gave it a more plausible label, ie " Control Circuit for A/C Compressor B10A9 11 [008] - Short to Ground Intermittent". Car is obviously still under first year warranty so it will get looked at during its first service - but, any clues as to what normally causes this from personal experience, I know it could be the compressor itself or wiring or controller. I've searched the internet for answers but while that exact fault has been reported a few times, no follow up "what fixed it" postings happened!
↧
P013400 code but no engine light?
I scanned my 2013 citigo for fault codes today with a hand held scanner (xtool vag401) and it found one code P013400. I believe this means there is a fault with the pre cat o2 sensor or the wiring to it. Funny thing was the engine management light has never come on. Is this normal?
I've erased the code now and I'll check to see if its returned in a few days.
I've erased the code now and I'll check to see if its returned in a few days.
↧