There seams to be such a varied selection of silicon hoses and prices same with the tip pipes from £35 to £150 creation motorsport are local to me.and the prices seam reasonable any body recommend which hoses to use?
↧
mk1 octavia vrs silicon hoses and tip
↧
RVC
bought kufatec rvc kit i've tried even with the help some very knowledgeable people on here to no avail got all the kit new Columbus new loom new bt module is there anybody close to chesterfield that can help before i rip it all out and bin it done a couple of scans before and after 
Log-KC58SCC-TMBBF73T799016257-51030km-31708mi-after new codes.txt 16.71KB
3 downloads
Log-KC58SCC-TMBBF73T799016257-51030km-31708mi-before new codes.txt 16.73KB
3 downloads
↧
↧
Windows 10 +vag com ?
hope im in the right place I've been using Ross tec vag com on my toughbook vista business then the toughbook gave up the ghost no more to do went out bought new asus laptop on my sons say comes with windows 10 , so the first job was to download vcds from Ross tec . That's when it all come to a halt plug into car did test fine tryed to save got message can't open codes file code.dat .tryed looking at about information another message.unable to write to the vcds, cfg file check that the file is not read only and that you have the rights to wright to it . Hopefully someone can help or its £800 down the drain regards oldtimer
↧
Fault Code 01314 Engine Controller Spurious Comms Intermitt
Hi, as per title line, car is a late 2009 Ibiza 1.4 SC. What happened was, after a 75 mile run with no problems, when nearly back home, I noticed an indicator light flashed once and some relay(s) gave a single chatter - nothing else happened. When back home I checked which indicator lived in that area of the revcounter and discovered it was the engine management fault indicator. Scanned the car with VCDS and found a single fault, ie 01314 004 and that fault only occurred once, cleared fault, checked seating of all fuses and relays and engine ECU connector - all okay.
I've checked on the internet and mainly any questions asked about this kind of get ignored or at least no definative answer(s) offer as to the real root cause of this.
So, any one else had this or heard about someone having this fault logged? Ta!
↧
Any 150 bhp TSI Yeti Remaps Yet?
As per the subject heading, has anyone had their 150 TSI (or any new 150 TSI for that matter) mapped yet? If so what potential is there to perk it up a bit without going crazy or needing any new parts.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
↧
↧
programming controller
Hi Guys and Gals,
I have a brand new A/C controller and was wondering how to programme it, is it a case of copy and paste off the old one?, or do I have to take it to the stealer?.
I have VDCS, can I do it with that?, if so how?
TIA
Trev AKA Aston Bodger
↧
VCDS - values out of range
Hi,
2 questions for all you VCDS experts out there.
I plugged my new MY16 Octavia VRS into VCDS for the first time and started to try coding some of the possible adaptations.
the first 3 worked (changing the throttle mode to audi, showing blower speed on auto and switching off the sound generator) and I was able to follow the instructions fairly easily, however when I started to try and code other functions I was getting errors.
On trying to change the voltage for the Start/Stop system i followed the instructions:
Go to Module 19 (Can Gateway)
? Adaption
? Go to Kanaal: Start_stop_voltage_limit
? change to 12.1V ( standaard is 7.6V)
however when i came to apply the new voltage i get an error message saying the value is out of range.
I also had this on the first stage of enabling Traffic sign recognition.
The next issue is when it comes to enabling the intelligent light assist. I followed the instructions provided by Andyvee and there was a slight descriptive difference in channels, however the coding was accepted. When i came to activate light assist however (by pushing the stalk forward) I received a maxidot error "light assist error". Is this because I was stationary? I have now reverted all changes for the light assist to standard
EDIT: I forgot to sya I'm using version 15.7.4. should I try again with one fo the newer betas?
EDIT 2:
I've just found this from Andyvee:
- The latest beta of VCDS has a tick box for a soft controller reset when changing adaptation channels - this is a feature I asked Ross Tech to add for a reason, it is needed on MQB platform cars, so use it!
Just to confirm, should I be ticking the box at the same time as changing the channel?
↧
VCDS to change country
HI anyone is the wrexham/chester area willing to change my Country settings via vcds please?
Bob
↧
Big forge FMIC fitted
Fitted a colossal forge FMIC to my VRS just thought I'd share a few pictures with you guys
Attached Thumbnails
↧
↧
Engine warning Light on Dash 008583 - Bank 1 System too Lean at Idle
Help please, the car is due a service this week anyway so it will be going into the
dealers but i would like to be armed with a bit more info before they have my pants
down and tell me i need a new engine. Would i be right in thinking its an injector
issue and the pressure 990mbar is too low in bank 1. It runs fine but sounds
a bit clanky on start up like its only firing on 3 cylinders but like i said runs smooth
once started. VCDS autoscan Below
Wednesday,27,July,2016,16:58:22:28247
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 15.7.4.1 (x64)
Data version: 20160216
www.Ross-Tech.com
VIN: TMBEF21Z***************** License Plate: **55 ***
Mileage: 145040km-90123mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1Z (1K0)
Scan: 01 03 08 09 15 16 17 19 25 37 42 44 46 52 56 62 72
VIN: TMBEF21Z868067842 Mileage: 145040km-90123miles
00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06F-907-115-AXX.clb
Part No SW: 1Z0 907 115 A HW: 1Z0 907 115
Component: 2.0l R4/4V TFSI 0040
Revision: --H10--- Serial number: SKZ7Z0E3303066
Coding: 0203000318070160
Shop #: WSC 00191 264 15243
VCID: 33632295525B3FA6B3-8066
2 Faults Found:
008583 - Bank 1; System too Lean at Idle
P2187 - 004 - - MIL ON
Freeze Frame:
Fault Status: 11100100
Fault Priority: 0
Fault Frequency: 3
Reset counter: 255
Mileage: 144499 km
Time Indication: 0
Date: 2000.00.00
Time: 13:55:13
Freeze Frame:
RPM: 745 /min
Load: 15.3 %
Speed: 6.0 km/h
Temperature: 61.0°C
Temperature: 28.0°C
Absolute Pres.: 990.0 mbar
Voltage: 14.478 V
005699 - Please check DTC Memory of Electric Load Controller
P1643 - 001 - - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 2
Reset counter: 255
Mileage: 144823 km
Time Indication: 0
Freeze Frame:
RPM: 322 /min
Load: 45.9 %
Speed: 0.0 km/h
Temperature: 45.0°C
Temperature: 44.0°C
Absolute Pres.: 990.0 mbar
Voltage: 11.811 V
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
Part No SW: 1K0 907 379 AA HW: 1K0 907 379 AA
Component: ESP FRONT MK60 0102
Revision: 00H13001
Coding: 0004738
Shop #: WSC 73430 790 00000
VCID: 71EFE89D68C74DB681-8024
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 1K0-907-044.lbl
Part No: 1Z0 907 044 H
Component: ClimatronicPQ35 084 0305
Shop #: WSC 00000 000 00000
VCID: 3B730AB57A0BF7E66B-806E
1 Fault Found:
00229 - Refrigerant Pressure
002 - Lower Limit Exceeded
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 3C0-937-049-23-H.lbl
Part No SW: 3C0 937 049 E HW: 3C0 937 049 E
Component: Bordnetz-SG H37 1002
Revision: 00H37000 Serial number: 00000003845862
Coding: 818C0F030004140000110D000000000000087F075C
Shop #: WSC 73430 790 00000
VCID: 2B533AF58A6B6766FB-807E
Subsystem 1 - Part No: 1Z2 955 119 A Labels: 1KX-955-119.CLB
Component: Wischer SK351 012 0401
Coding: 00065525
Shop #: WSC 73430
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 R HW: 1K0 909 605 R
Component: Q4 AIRBAG VW8 018 2200
Revision: 02018000 Serial number: 0038MD02D2FZ
Coding: 0020788
Shop #: WSC 73430 790 00000
VCID: 3B730AB57A0BF7E66B-806E
Subsystem 1 - Serial number: 6332MSME0C46603FH
Subsystem 2 - Serial number: 6342MSME0C411213$
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 1K0-953-549-MY8.lbl
Part No SW: 1K0 953 549 AF HW: 1K0 953 549 AF
Component: Lenksäulenmodul 034 0070
Coding: 0000042
Shop #: WSC 28061 210 64639
VCID: 76E5DB8101A96A8E54-8022
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1K0-920-xxx-17.lbl
Part No: 1Z0 920 941 C
Component: KOMBIINSTRUMENT VD1 0918
Coding: 0003401
Shop #: WSC 55957 001 1048576
VCID: 377B16854623D3868F-8062
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 1K0-907-530-V1.clb
Part No SW: 1K0 907 530 F HW: 1K0 907 951
Component: Gateway H10 0120
Revision: H10 Serial number: 2800105A208C61
Coding: 3D3F0348071303
Shop #: WSC 73430 790 00000
VCID: 2A5D3FF185917E6E00-807E
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer Labels: 1K0-920-xxx-25.clb
Part No: 1Z0 920 941 C
Component: IMMO VD1 0918
Shop #: WSC 00000 000 00000
VCID: 377B16854623D3868F-8062
No fault code found.
-------------------------------------------------------------------------------
Address 37: Navigation Labels: 1T0-919-887.lbl
Part No: 1Z0 919 887 B
Component: Navigation 0412
Coding: 0000002
Shop #: WSC 73430 790 00000
VCID: 479B664536C3A306FF-8012
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MIN2.lbl
Part No: 1T0 959 701 B
Component: Tuer-SG 024 2346
Coding: 0000756
Shop #: WSC 73430 790 00000
VCID: 36651B8141292A8E94-8062
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K2 909 144 K
Component: EPS_ZFLS Kl.2 D06 1701
Shop #: WSC 00000 000 00000
VCID: 346121895755389EAA-8060
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1K0-959-433-MIN.clb
Part No: 1K0 959 433 AK
Component: KSG 0401
Coding: 01D002007F2D8505485F861004CC
Shop #: WSC 73430 790 00000
VCID: 79FFD0BD30B705F639-802C
Subsystem 5 - Part No: 1Z0 951 171
Component: Innenraumueberw.008 4801
Coding: 00000000
Shop #: WSC 00000
Subsystem 6 - Part No: 1K0 951 605 C
Component: LIN BACKUP HORN H03 1301
Subsystem 7 - Component: NGS n.mounted
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN2.lbl
Part No: 1T0 959 702 B
Component: Tuer-SG 024 2346
Coding: 0000756
Shop #: WSC 73430 790 00000
VCID: 377B16854623D3868F-8062
1 Fault Found:
00944 - Heated Exterior Mirror; Passenger Side (Z5)
012 - Electrical Fault in Circuit
-------------------------------------------------------------------------------
Address 56: Radio Labels: 1T0-035-095.lbl
Part No: 1T0 035 095
Component: Radio 0412
Coding: 0000402
Shop #: WSC 73430 790 00000
VCID: 6BD3FAF54AEBA766BB-803E
No fault code found.
-------------------------------------------------------------------------------
Address 62: Door, Rear Left Labels: 1K0-959-703-GEN2.lbl
Part No: 1K0 959 703 E
Component: Tuer-SG 021 2435
Coding: 0000144
Shop #: WSC 73430 790 00000
VCID: 326D2791AD4136AEB8-8066
No fault code found.
-------------------------------------------------------------------------------
Address 72: Door, Rear Right Labels: 1K0-959-704-GEN2.lbl
Part No: 1K0 959 704 E
Component: Tuer-SG 021 2435
Coding: 0000144
Shop #: WSC 73430 790 00000
VCID: 33632295525B3FA6B3-8066
No fault code found.
End-------------------------(Elapsed Time: 01:40)--------------------------
↧
Which lead please ?
Just got the wife a 2013/2014 Seat Ibiza toca, which lead do I need to read the car ?
I currently have a gendan micro-can lead, but it doesn't get passed the gateway ?
Any help would be welcome
I currently have a gendan micro-can lead, but it doesn't get passed the gateway ?
Any help would be welcome
↧
Cluster login - Immo light?
Hi all,
Just wanted to check something.
I logged into my cluster earlier and it left the immo light on and a key that wasn't coded to the car was able to start it, whilst the immo light stayed on.
Is it normal behaviour for logging into the cluster with VCDS and the SKC to temporarily disable the immo? After leaving the ignition off for 5 mins, it was enabled again....
↧
Misfire under load, can I have some advice please?
I have an 09 Facelift petrol VRs
Was driving home from work today and the car misfired all the way home particularly around 2000rpm and under load, eventually the CEL started flashing then the EPC light came on. The OBD only logged two faults even though it misfired all the way home, about 8 miles.
Diagnostic from VCDS is:
Address 01: Engine (CCZ) Labels: 06J-907-115-CCZ.clb
Part No SW: 1Z0 907 115 AF HW: 1Z0 907 115 F
Component: 2.0l R4/4V TFSI 0010
Revision: AAH11--- Serial number:
Coding: 0203000C18070160
Shop #: WSC 73430 790 00999
VCID: 79FC6A87308BBE8AE4-802C
2 Faults Found:
000770 - Cylinder 2
P0302 - 000 - Misfire Detected
Freeze Frame:
Fault Status: 01100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 88091 km
Time Indication: 0
Date: 2010.12.23
Time: 17:17:25
Freeze Frame:
RPM: 2021 /min
Load: 90.9 %
Speed: 72.0 km/h
Temperature: 96.0°C
Temperature: 24.0°C
Absolute Pres.: 1010.0 mbar
Voltage: 14.097 V
004874 - Cylinder Disabling
P130A - 000 - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 88096 km
Time Indication: 0
Date: 2010.12.23
Time: 17:22:48
Freeze Frame:
RPM: 4083 /min
Load: 87.8 %
Speed: 58.0 km/h
Temperature: 93.0°C
Temperature: 28.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 13.970 V
Readiness: 0000 0000
Would i be right in thinking coil packs?
Thanks
↧
↧
MY17 Yeti comfort turn signals
HEX-USB+CAN running Ross-Tech 16.8 + updates
Tried to change comfort turn signals to 5
Selected Cent Elect-09 / Adaptation-10 and from drop box selected "comfort turn signals".
Changed this from 3 to 5 using up/down buttons then saved it, confirmed saving to 5 blinks. DID NOT WORK.
I went into Maxidot and did a factory reset in the Lights and Vision section. DID NOT WORK.
I went back into VCDS program and checked it, 5 was the default blinks in channel 31.
Tried it on the road just to make sure.
So it should be flashing 5 times according to the VCDS but it's still 3, anyone any ideas
↧
Check engine light on
Hello
I'm new to this forum so sorry if I'm not posting where I should.
Just recently, I've purchased a Skoda Octavia 2.0 (AQY engine code) and after driving it approx. 2.300 km the check engine light came on just the other days.
Now, I should point out the fact that the car still drives ok, but now it has a sort of rough idle (it may vary 20 to 30 rpm on the dash). It can be heard rather than seen and a higher fuel consumption (when idle, the instant fuel consumption shows 2,4 - 2,2 l/h instead of the regular 1,1 - 1,2 l/h)
Also, now around the car you can smell unburnt petrol.
Also I should point out the fact that when I fuelled with a high octane petrol, the light turned off after approx. 1km but came on again after 2-3 km.
Other than that, the car runs ok.
I used a tester to find the error codes and this is what I have found:
16518 - Oxygen (Lambda) Sensor B1 S1
P0134 - 35-00 - No Activity
17536 - Fuel Trim; Bank 1 (Mult)
P1128 - 35-10 - System too Lean - Intermitent
16555 - Fuel Trim; Bank 1
P0171 - 35-00 - System Too Lean
and
01039 - Coolant Temperature Sensor (G2)
30 - 10 Open or Short to Plus - Intermitent
Now the second one, I don't think it's relevant for the engine light but I thought I should post it anyway.
Can you please tell me if this is a clear indication that the lambda sensor should be replaced?
↧
Can you re-code 2nd hand Highline Gateway or has it 'Component Protection'?
Hi.
I am trying to create a guide for MFSW (Multi Functional Steering Wheel) on Octavia Mk3. You need suitable steering wheel and Gateway (J533 in VCDS) controllers. The correct Gateway controllers are 'Highline' versions.
EBay is full of Highline Gateway controllers. But can they be re-coded or are they just expensive lumps of plastic? Someone must be doing something with them. Do they have Component Protection?
Can I fit a Highline Golf controller in my Octavia?
Czech websites have (I think) new controllers for about 90 euros delivered, and as I understand new controllers are OK to use. Not sure what they cost from UK Skoda dealer?
I have lots of questions and not many answers regarding the Gateway's.
Thanks
I am trying to create a guide for MFSW (Multi Functional Steering Wheel) on Octavia Mk3. You need suitable steering wheel and Gateway (J533 in VCDS) controllers. The correct Gateway controllers are 'Highline' versions.
EBay is full of Highline Gateway controllers. But can they be re-coded or are they just expensive lumps of plastic? Someone must be doing something with them. Do they have Component Protection?
Can I fit a Highline Golf controller in my Octavia?
Czech websites have (I think) new controllers for about 90 euros delivered, and as I understand new controllers are OK to use. Not sure what they cost from UK Skoda dealer?
I have lots of questions and not many answers regarding the Gateway's.
Thanks
↧
Selective Locking on Octavia III (MQB)?
I've recently bought a 2015 Octavia Elegance Estate and have done most of the VCDS tweaks, but I can't find one for enabling selective locking (one press unlocks drivers door only, two presses needed to open all doors).
Any got any ideas how to enable this on an Octavia III (or any MQB platform car)?
Would also be nice to enable comfort opening/closing of the windows, any ideas on that appreciated too.
↧
↧
Octavia MkII 1Z5 ABS Purge with VCDS
I need to purge my ABS and am loathed to take car to a garage as I do all my own fixing.
What I want to know is, purely to do the ABS, can I use a £5 lead from eBay with my laptop?
I'm just looking for the cheapest way to activate the pump.
Please no guessing, I'd rather responses from someone who's actually tried it and can perhaps provide a link to a supplier.
What I want to know is, purely to do the ABS, can I use a £5 lead from eBay with my laptop?
I'm just looking for the cheapest way to activate the pump.
Please no guessing, I'd rather responses from someone who's actually tried it and can perhaps provide a link to a supplier.
↧
Improve Throttle Response - Superb 125TDI 4x4 (3T)
I tried the solution mentioned at http://www.briskoda.net/forums/topic/380829-superb-mkiii-vcds-adaptations-tried-and-tested/#entry4611928 but sadly there were no selections available ...ie: No Audi, Skoda nothing....
After much searching I found a possible solution by way of adding a 'Throttle Response Controller' for AUD$299. My thinking is that if a box can apply some sort of electronic wizardry then maybe there is some coding that may address this issue???
My VCDS knowledge is very limited and I was hoping one of the Briskoda techno experts may be able help??
Can anyone help??
↧
Gateway coding
Is there anyone local to Crawley who would be able to code my gateway if I was to retro Bluetooth to my fl octy vrs with Columbus? Drop me a message with how much you'd be after.
Thanks
Thanks
↧
