Hi.
I have a Skoda Yeti VIN: TMBLC75L6B6047470
The Right Headlight Xenon went dead, so I changed the Ballast unit --> Ok, Light's on
After a few months it died.
I have cheked all fuses. All ok.
The Workshop mailed me this:
------------------------------------------------------------------------------------------
Chassis Type: 7N0
Scan: 01 03 08 09 10 15 16 17 18 19 22 25 2E 37 42 44 46 52 55 56
62 69 72 77
VIN: TMBLC75L6B6047470
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
18-Aux. Heat -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
22-AWD -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Xenon Range -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
69-Trailer -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 1K0 937 086 H HW: 1K0 937 086 H
Component: BCM PQ35 M 103 0615
Revision: 00103 AD
Coding: 40000AB8E00508C040080080110089E4437400AE726DA5605C8540000040
Shop #: WSC 33361 790 00999
VCID: 356B3F0D9C5A571
Subsystem 1 - Part No: 5L1 955 119 A
Component: SK356 26 0604
Coding: 00F7B5
Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 280211 05 54 0403
Coding: 0730ED
1 Fault Found:
00927 - Terminal 30 (Right)
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 1
Fault Frequency: 1
Reset counter: 136
Mileage: 156169 km
Time Indication: 0
Date: 2111.14.27
Time: 11:24:03
Freeze Frame:
Term 15 On
Voltage: 13.70 V
ON
ON
Term 50 Off
OFF
OFF
-------------------------------------------------------------------------------
Is there anyway to read this and find what "module" is Faulty?
When I changed the Ballast in the headlight unit, do I have to alter any codes for this unit?
Will be glad for any help!