Hi,
2 questions for all you VCDS experts out there.
I plugged my new MY16 Octavia VRS into VCDS for the first time and started to try coding some of the possible adaptations.
the first 3 worked (changing the throttle mode to audi, showing blower speed on auto and switching off the sound generator) and I was able to follow the instructions fairly easily, however when I started to try and code other functions I was getting errors.
On trying to change the voltage for the Start/Stop system i followed the instructions:
Go to Module 19 (Can Gateway)
? Adaption
? Go to Kanaal: Start_stop_voltage_limit
? change to 12.1V ( standaard is 7.6V)
however when i came to apply the new voltage i get an error message saying the value is out of range.
I also had this on the first stage of enabling Traffic sign recognition.
The next issue is when it comes to enabling the intelligent light assist. I followed the instructions provided by Andyvee and there was a slight descriptive difference in channels, however the coding was accepted. When i came to activate light assist however (by pushing the stalk forward) I received a maxidot error "light assist error". Is this because I was stationary? I have now reverted all changes for the light assist to standard
EDIT: I forgot to sya I'm using version 15.7.4. should I try again with one fo the newer betas?
EDIT 2:
I've just found this from Andyvee:
- The latest beta of VCDS has a tick box for a soft controller reset when changing adaptation channels - this is a feature I asked Ross Tech to add for a reason, it is needed on MQB platform cars, so use it!
Just to confirm, should I be ticking the box at the same time as changing the channel?